The usual maintenance work of the metal mesh belt conveyor

The metal mesh belt conveyor needs the care of the operator who is fixed during the whole process of the operation. The metal mesh belt is a machine that continuously conveys materials by friction drive. By applying it, a conveying flow of materials can be formed on a certain conveying line from the initial supply point to the final discharge point. This can convey crushed materials as well as finished products. In addition to pure material transportation, according to the technological requirements in the production process of various industrial enterprises, a rhythmic pipeline is formed to take care of the staff. It is necessary to have a good understanding of the basic technical knowledge and the characteristics of the belt conveyor .






The company must formulate a metal mesh belt conveyor to facilitate equipment maintenance management, maintenance, and operating procedures to take care of employees. Employees must have handover records.

The feeder of the metal mesh belt conveyor must be uniform, there are too many feeders, and the feeder-type tube cannot be filled with raw material overflow.

When the metal mesh belt conveyor is working, non-care personnel are not allowed to approach the equipment. No staff can touch all rotating parts. The B-shaped mesh belt generates greater heat through friction at high temperatures. Due to the difference in thermal expansion coefficients, welding of different materials may cause thermal fatigue. Parts whose temperature exceeds 400 are intermittently reduced due to thermal expansion. Creep, (high temperature) thermal brittleness, brittleness of carbon precipitation, and temperature changes (cooling and expansion) need to be considered. The influence of high temperature on lubrication. Silicon, graphite, and molybdenum disulfide lubricants have good heat resistance. If common failures occur, please stop the operation immediately to eliminate common failures. It is not easy to remove it immediately, but if there are any major hazards in the work, please write down and wait for the removal during maintenance.

When maintaining the metal mesh belt conveyor, you must carefully observe the working conditions of each part, check the connecting anchor bolts (composed of: the head and the screw) of each part, and find that the looseness will quickly tighten. Stainless steel mesh belt is a machine that continuously conveys materials by friction drive. By applying it, a conveying flow of materials can be formed on a certain conveying line from the initial supply point to the final discharge point. This can convey crushed materials as well as finished products. In addition to pure material transportation, it can also form a rhythmic assembly line according to the technological requirements in the production process of various industrial enterprises. Therefore, metal mesh belts are widely used in various modern industrial enterprises. Although it is an indispensable part of robots in various industries and modern automated production lines, cleaning and maintenance of the moving parts of the belt conveyor must be carried out when the operation of the belt conveyor is strictly prohibited.

The spiral tension equipment (equipment) of the assemble line at the end of the metal mesh belt conveyor must be properly adjusted to maintain the belt (Belt) with all the tension resistance during normal operation. Nursing staff should carefully observe the status of the conveyor belt operation. Part of the damaged area must be replaced immediately or when it is waiting for repair according to its damage level (whether it causes harm to Manufacture). Please use the removed conveyor belt separately according to its damage level.

When maintaining the metal mesh belt conveyor, it is necessary to adjust the spiral tension equipment (equipment) according to its working attitude, cleaning, lubrication and inspection.

Under normal circumstances, the metal mesh belt conveyor starts when there is no load, and stops after the raw material is unloaded.

In the whole process of application, the metal mesh belt conveyor must maintain all normal wetted and decomposed parts, and must be repaired in June during the operation. During maintenance, be sure to eliminate the shortcomings of the application and description, and remove damaged parts and lubricants.

The company can set the maintenance cycle time according to the working standards of the metal mesh belt conveyor.