Metal mesh belt manufacturing process

Metal mesh belt, also known as stainless steel mesh belt, is a conveyor belt in food processing machinery, glass products, conveying machinery and other automatic equipment. Metal mesh belt materials include 1cr13 mesh belt, 201 mesh belt, 304 mesh belt, ICY18N19Ti mesh belt, 2520 mesh belt, 316 mesh belt and so on.






Simple production instructions for metal mesh belt:

The metal mesh belt is composed of a stainless steel mesh surface and a shaft. The equipment is mainly composed of three machines: winding machine, embossing machine and argon arc welding. Purchase ready-made materials. Generally, the thickness of the mesh belt is different from the shaft thickness of the mesh belt. Now, the pressure axis measures the number of buckles based on the width of the mesh belt. You can wrap the wire of the mesh belt. This can happen at the same time. Both are assembled by workers, and both sides are spot welded, and the finished product is ready.

Detailed production instructions for metal mesh belts

1. Determine the material of the steel wire according to the range of the metal mesh belt.

Metal mesh belts have different requirements for steel wire materials under different conditions, generally choose 201 or 301, 314 or 316.

2. Customize mesh belt specifications according to customer requirements

When ordering a mesh belt, the customer must indicate the following mesh belt parameters: each mesh belt accessory is marked with the pitch, steel wire diameter, pitch and rope diameter, length and width of the mesh belt. Next, determine the total length of the mesh belt.

3. Forming mesh belt accessories

After the materials enter the factory, enter the machine, and then wind the mesh belt, it is necessary to process the general-purpose steel wire. Cut the mesh belt steel wire formed according to the mesh belt marking diagram, and fix the width of each section of the mesh belt.

4. Mesh belt

After the mesh belt is wound and cut, the mesh belt is woven and fastened according to customer requirements, and all the formed mesh belts are wound in series. After the wiring is completed, the mesh belt mold should be determined during the processing to ensure that the thread pitch and the pitch match the mark.

5. Edge treatment of mesh belt

When the mesh belt is continuously wound and formed into a semi-finished mesh belt, welding, bending, spiral welding and adding methods must be used to process the edges, chains, chain plates, and chains of the mesh belt series.

6. Clean the mesh belt

After the mesh belt is welded, due to the appearance of welding points between the mesh belt and grease during the winding process, please clean the surface gloss with a weak alkali or weak acid. If there is no special instructions, the mesh belt can be cleaned with detergent. In the cleaning process of the mesh belt, if the customer needs surface treatment, it can also be galvanized. Or copper plating and other methods for surface treatment.

7. Packing mesh belt

According to customer requirements, mesh belts are packed in plastic or sealed boxes.

Yangzhou Quanda Metal Mesh Belt Co., Ltd. is committed to producing various mesh belts, mesh chains, conveyor mesh belts, etc. We will provide you with the latest information in the industry.