What problems are prone to occur when stainless steel mesh belts are used on the assembly line

Everyone knows that stainless steel mesh belts have good habits, but not everyone knows stainless steel mesh belts. If it is not used well, it will cause some malfunctions. Stainless steel mesh belt is mainly used in: glass bottles, food, light bulbs, metal, utensils, chemical fiber, printing and dyeing, medicine, electronics, powder metallurgy, heat treatment, wood, logistics and transportation industries, automatic devices and automatic, assembly lines; natural gas uses stainless steel mesh belts Convey various oven systems such as food machinery, glass machinery, and conveyor machinery.

The stainless steel mesh belt or the chain plate machine groove is seriously damaged, which causes the gap between the two to be too large; the chain pre-tightening force of the stainless steel mesh belt is insufficient, and the chain is piled up at the end of the machine, which causes the chain plate to be easily separated from the chain plate machine slot Remove from the middle; stainless steel mesh belts have different transmission chain lengths and unbalanced forces; when stainless steel is installed with road barriers, it cannot be placed at a right angle, but it must be strong and excessively bent.






1. The stainless steel mesh belt should be watched by professionals during the unsurprising test process.

2. Employees can conduct regular inspections according to the service standards and warranty requirements of the mesh conveyor.

3. When using stainless steel mesh belts, personnel should ensure that the appearance of the residue is clear, and use steel balls to clean the mesh belt when necessary. The stainless steel mesh belt keeps it clean and the same.

4. In order to extend the service life of the stainless steel mesh belt, the feed of the mesh conveyor must be uniform, and the feed filter hopper must be filled with material to avoid micro durability. In addition, the lubrication status of the stainless steel fine mesh belt and real-time lubricating oil will extend the service life of the equipment.

5. When you find that the object at the end moves very violently, you should immediately disconnect the power supply. After removing the back cover, the machine can be used normally. Drying mesh belts are mainly used in: glass bottles, food, light bulbs, metals, utensils, chemical fiber, printing and dyeing, medicine, electronics, powder metallurgy, heat treatment, wood, logistics and transportation industries, automatic devices and automatic. Assembly line; natural gas, coke oven gas, electronic infrared and other oven systems (such as food machinery, glass machinery, transportation machinery and other B-shaped mesh belts) generate higher heat due to friction at high temperatures; welding due to different thermal expansion coefficients The materials are also different, and thermal fatigue will occur simultaneously. The intermittent reduction caused by thermal expansion between parts at temperatures higher than 400C must consider the effects of creep, thermal embrittlement, embrittlement of carbon precipitation and temperature changes. The influence of high temperature on lubrication, silicon, graphite and molybdenum disulfide lubricants have good heat resistance.