How to install stainless steel mesh belt on mesh belt conveyor

Stainless steel mesh belt is a conveyor belt used to transport materials and is an important part of the mesh belt. In order for the conveyor to achieve a good production process, the correct installation of the conveyor belt is the key. The exact method of connecting the stainless steel mesh belt is as follows: the metal conveyor belt must be leveled from a part of the equipment, and the average distance between the chains and sprockets on both sides is always the same. Then, when installing the mesh belt, you must first ensure that the mesh pieces are fastened one by one, so that deviations will not cause uneven force on the stainless steel mesh belt. Then connect the chain: the chain must be connected to the mesh belt and tensioned synchronously; connected to the fuselage downward; the coupling of the fuselage is a key step, and the runway must be perfect, stable, and there should be no deviations up, down, left, and right.






The straightening and connection of the mesh conveyor should be carried out in a straight line. After vertical, make welding and fixing bolts. The flatness of the connecting point of the guide rail is the key point related to the levelness and noise of the mesh conveyor belt. It must be firm. There is no bump, the feet of the entire conveyor should be level. After the entire machine is installed, each foot needs to be adjusted one by one to make the screen conveyor parallel to the entire conveyor.

Welcome to call Yangzhou Quanda Metal Mesh Belt Co., Ltd.