Talking about the weaving production process of metal mesh belt

Metal mesh belt is a conveyor belt that uses static friction to convey materials in a continuous friction drive mode. It can be made of metal and engineering plastics. Both sides can be made of chains or direct mesh belts. Various wire mesh belt strength conveyor chains have many different chain pitches: the smallest chain pitch depends on the requirement of sufficient strength for the sprocket teeth, and the largest chain pitch generally consists of chain plates and ordinary chains. If necessary, the sleeve between the chain plates can be strengthened to exceed the nominal larger chain pitch, but space must be left in the gear teeth to remove the sleeve.

The metal mesh belt uses a mesh belt made of metal wire as a conveyor. The two sides of the chain are connected by middle pins, and the chain is driven by a sprocket, so that the mesh belt moves along the chain. The transportation direction; it can also be directly driven by a special rubber roller. The action of the mesh belt, the former is generally suitable for conveying forms with heavier material weight and longer length, and is used for conveying required by industries such as cooling and conveying. Therefore, the density of the mesh belt is relatively fine, and the latter generally uses a denser mesh. The belt is suitable for the transportation of small materials or special objects with short transportation intervals, such as the transportation of dry materials such as tea. Each wire mesh belt bearing includes a pin and a sleeve on which a sprocket rotates. Both the pin and the sleeve are surface hardened, allowing the hinge to withstand higher pressure, and can withstand the load pressure transmitted by the roller and the impact during meshing. Mesh conveyor belt structure: According to the driving mode, it can be divided into power roller line and unpowered roller line. According to the design form, it can be divided into horizontal conveyor roller line, inclined conveyor roller line and rotary roller line. It can also be specially designed according to customer requirements.

The composition of the metal mesh belt is braided and welded with metal wires, and the composition is divided into winding and threading. The wire is wound on the movable mold, and the fixed mold is used for spinning and extruding to generate the pitch and mesh belt pitch, thereby completing the production of the winding. For the thread, the two mis-toothed gears rotate in opposite directions. The straight wire is pressed into a wave shape, combined with the winding pitch, and then woven into a mesh belt pattern, and the two sides are formed by argon arc welding.