Slat chain conveyor belt

Slat chain conveyor belt refers to a conveyor belt that is formed from plastic into a single-plate semi-finished product module, which is then repeatedly assembled into a chain type, and installed on a conveyor to carry and convey materials.

W (width), horizontal unit of chain conveyor belt
L (length), longitudinal unit of chain conveyor belt
1 Finished chain conveyor belt-surface; loading surface
2 pins for assembly in 4 pin holes
3 modules, semi-finished products; monolithic products
4 pin holes for 2 pins
P (pitch), the center distance of the two through holes of the module
When assembling into a belt: Repeatedly increase from 3 modules to the required L (length); 2 pins pass through the 4 pin holes and are fixed in the 4 pin holes, used to connect single products in series in a long strip.


At moderate temperatures, chain drives are very much needed. In fact, the drive is performed, and the belt itself is only used to convey the medium. For high temperature operations that require chain drive, the belt is composed of a special heat-resistant alloy chain. In fact, any chain link or roller chain can be used.
Applications include casting conveyor belts, forging conveyor belts, heat treatment conveyor belts, etc.

The Slat chain conveyor belt is suitable for the application of conveying products at medium speed in various processing equipment. It is suitable for operating at high temperatures with the lowest maintenance cost, and for situations where dust or insufficient lubrication may cause problems with other types of chains. Typical applications for lightweight pivot chains include conveying paper, food and light metal parts. Heavy-duty pin chains are used in continuous drawing furnaces to transport heavy products, including casting and forging applications.

The Slat chain conveyor beltis formed by connecting any of the following chains, including roller chains, engineering series roller chains and pin chain rods, angle steel, channels, rods, tubes or tubing, which pass through the mesh and enter the holes of the chain to serve as chain pins . For tightly woven wire mesh, use steel bars and grooves, weld or bolt it to the mesh, and then connect it to the chain with a chain attachment.
Flexible board edges (also called side fences or side wings) can be attached to the edges of the conveyor belt. In our tightly woven wire mesh type, we also provide a flange flipped grid edge that can cover the entire width of the conveyor belt Conveyor belt welding scraper or divider.
Our chain braided conveyors are available in ordinary steel, 304 stainless steel, 316 stainless steel and 314 and 330 stainless steel.