Introduction to installation of high temperature mesh belt, chain post mesh belt and chain mesh belt

1. Scope of application: high-temperature mesh belts refer to various mesh belts with a working temperature above 800, and chain mesh belts with a working temperature above 600 must also meet the following requirements.

2. Requirements for installation and adjustment of high temperature mesh belt, chain post mesh belt and chain mesh belt:






1. The heat-resistant chain mesh belt can only be installed when the oven is off and the temperature is lower than 300;

2. Before installing the high temperature mesh belt, check whether all the rollers, idlers and tensioners are parallel to each other, and they must be perpendicular to the center line of the furnace body;

3. After the chain mesh belt is installed and connected, it should be kept below 300 and run quickly for 12 hours to cool the deviation until the mesh belt stainless steel chain is observed without any deviation or snaking. Before it gets hot

4. After the oven is heated to working temperature, it should be operated for 12 hours without load for thermal adjustment and correction until the chain mesh belt is observed to run smoothly or snaking before it can be loaded and used.