Maintenance method of metal mesh belt products

Speaking of metal mesh belt products, I don't know how much you know. What maintenance methods should be paid attention to when applying metal mesh belts? So let me give you a brief introduction.





1. In the process of transportation and storage, the metal mesh belt should be kept clean, avoid sunlight, rain and snow, avoid contact with acids, alkali oils, organic solvents and other substances, and keep it away from the equipment for one meter to generate heat.

2. During storage, the temperature in the warehouse should be kept between -18-40, and the relative temperature should be kept between 50-80%RH.

3. During the storage period of the metal mesh belt, the product should be rolled into a roll, not foldable, and it should be turned once every season during storage.

4. Metal mesh belts of different models, specifications, and layers must not be connected to each other, and the joints should be glued together.

5. The type, structure, specification and number of layers of the metal mesh belt should be selected reasonably according to the conditions of use.

6. The running speed of the metal mesh belt should generally not be as large as 2.5m/s. For materials with large agglomeration and large abrasion, when using a fixed plough discharge device, the low speed should be used as much as possible.

7. The matching of the transmission roller diameter of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission roller and the reversing roller, and the requirements of the roller groove angle should be selected reasonably according to the design requirements of the conveyor. Conveyor belt.

8. The feeding direction should be consistent with the running direction of the tape. In order to reduce the impact of the material on the belt when the material is falling, a chute should be used to reduce the distance of the material falling; the belt take-up section should shorten the distance between the rollers, and use a buffer roller to avoid material leakage. A soft and moderate baffle should be used on the side of the belt. , So as not to scratch the surface of the conveyor belt if the baffle is too hard.

We always insist on creating more suitable metal mesh belt products for customers. The metal mesh belt produced will definitely make you feel value for money. We sincerely welcome friends who are interested to come to consult and purchase!